This automatic optical fiber tensile testing system is ideal for operator skill impartial use within production and laboratory settings. Two fundamental design configurations enable the consumer to choose between a set up for regular linear evidence testing with extra mandrels for rotary high strength testing.

The linear edition is designed for creation evidence testing with forces up to 22 N. Motor-driven clamps with carefully designed rubberized inserts ensure that the Optical Fiber Coloring Machine is not ruined in the screening procedure while at the same time getting rid of the requirement for an external air provide. Degrees of pulling force, tugging speed and hold time are automated and conveniently available to the operator with the built in LCD touch screen control. Information from assessments can be stored and accessed using the Universal serial bus port or Ethernet interface.

Mandrels the exact same design as with NYFORS’ optical fiber recoaters can be mounted on the evidence tester within the rotary higher power settings. The fiber is wrapped around the two mandrels which assistance it having a unique clamping system. In this way much higher loads can be used on the fiber, allowing breaking up power tests below managed circumstances.

Adjustable clamp placement facilitates testing using the greatest force amounts as well as testing of brief fiber measures. The compact and light weight style helps make the instrument simple to maneuver in a laboratory atmosphere and to integrate within a production work table in which space is at reasonably limited. The machine is a compact and light-weight tool perfect for testing the strength of optical fibers approximately 30 N. The machine is designed to fulfill all sorts of programs when a strength test needs to be carried out.

The machine is made using the consumer in mind. The fiber is easily positioned in the guided linear clamps, and the screening begins instantly having a “One Touch” go switch. The built in microprocessor regulates all of the important guidelines such as tugging force, pulling speed and hold time. This enables for a completely controlled test each and every time.

The machine can be linked to another PC, which allows access to all automated parameters and settings. The machine is tailored to stand-alone use or even to the integration into different subsystems. The machine posseses an substantial ability of signing and saving details including tugging force, tugging speed and Optical Fiber Coloring Machine along with other parameters.

Two recoat injector configurations are available. The PTR307 utilizes an automated pump to inject the recoat materials. The volume of materials dispensed by the automated injector is controlled by hand through the top-mounted “Inject” switch or programmed to the machine making use of the tablet controller. The PTR307B comes with a manual recoat shot system that needs the user to manually distribute the recoat material to the mold cavity; a replacement injector for the PTR307B recoater can be obtained listed below. Please note that this automated injector is simply appropriate for high-directory recoat materials, while the handbook injector works with each reduced- and- index recoat materials; both are sold separately below. Please contact Technology Support to learn more.

he handbook injector can be mounted to Yarn Binder using the 4-40 anchoring screws in the recoater real estate (see photo towards the right). Use a 3/32″ hex key to secure the injector before use. To connect the PTRRRM for the recoater mold, tighten the connector at the conclusion of the green plastic tubes, then loosen by way of a 1/4 turn to permit rotation.

The injector is equipped with a syndication valve and 2-place selection lever for directing the flow of recoat materials. A knurled dispensing screw with an inner plunger acts as a syringe for the recoat material. To fill up the syringe, point the handle downwards (i.e., towards the recoat bottle), then rotate the knurled dispensing attach counterclockwise till it rotates easily to fill the syringe (demonstrated inside the photo towards the right). Then, to inject the recoat material in to the mold, point the handle horizontally (i.e., dealing with the knurled attach) and rotate the screw clockwise until close to the end of the journey range is achieved. Avoid bottoming the dispenser since this kqkbws damage the internal plunger; also be careful when re-interesting the threads in order to avoid go across threading the dispensing attach. A number of fill up/inject actions may be required until air is displaced inside the system. Use lens cells as well as an acetone or alcoholic beverages cleaning solution to gather any excess recoat materials that runs from your mold.

SZ Stranding Line – New Light On A Important Idea..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.