Air conditioning units come in many different types and sizes but all have similar components and need to be frequently cleaned to obtain maximum efficiency and prolong the life of the unit. Because units differ in size and style on site common sense and a few mechanical ability are required.
The most important element of maintaining any ac unit is washing the coils. All ac units may have two coils, one known as the condenser coil as well as the other called the evaporator coil. In window type air conditioning units the coils are very close with the evaporator coil being usually the one within the conditioned space behind the filter.
The condenser coil is the one that is outside and rejects the warmth. The evaporator coil is generally pretty accessible without having removing most of the a/c outer cabinet. The condenser coil however is more difficult to get on the side that the majority of the dirt will build up on. You need to try to remove the a/c units’ outer shell by removing any screws which are holding it. Once you have removed the outer cabinet you must be able to view the back side from the condenser coil that could be so dirty it might not even appear to be a coil surface.
In many homes central air type ac units you condenser coil is situated in the element of your ac unit that sits outside. You may have to remove some louvered panels to have at the coil fins. The Evaporation Tray is located in an air handler of some kind in side the home. This can be inside the duct work above your furnace or in an air handler in an attic. The evaporator coil can some times be hard to obtain at. Always turn off power to the device and ware safety glasses as well as gloves.
Cleaning from the Evaporator – One of the most simple tasks that one could perform is the cleaning of the evaporator. When it is readily available then it is something that you can completely do on your own. Otherwise, then you better think twice about doing anything. It is possible to clean the underside in the evaporator with a brush. It is possible to slide it out just a little if you have difficulty in reaching the far end. You just have to be mindful when you are sliding it so which do not bend any pipes. You need to clean the tray on the bottom in the evaporator. You have to make certain moisture will not collect there. You can place some bleach on the pan to avoid the growth of fungus.
Now that you gain access to both coils it’s time to clean them. Start with brushing off as much of the heavy dirt using a small compact stiff bristle brush so the coil cleaner may be injected to the coil. Now wet the coils having a sprayer or garden hose being careful to not use a lot of water pressure concerning bend over or damage the fins. In the event that some fins are damaged you can repair all of them with a coil fin comb. Now spay on the genres quantity of coil cleaner injecting it in to the coils to ensure that it may start muzjvz loosen the dirt. Coil cleaner in an aerosol can is ideal for injecting the cleaner deep to the coil. In some instances a liquid concentrate or powder cleaner which can be mixed in a sprayer works well also as the wand of the sprayer fits into tight areas. These coil cleaners, brushes, coil coating treatment and condensate pan treatment are available online at HVAC Maintenance & Supplies . After letting the cleaner soak for five-7 minutes it best to then rinse or flush the coil with water. If you utilize a no rinse type cleaner and plan to run the a/c after you do not must rinse the evaporator coil. I usually recommend flushing the condenser coil the help remove dirt. Do this again process until you see water that is clean coming from the coil while flushing.
When you coils are clean you can use a coil coating treatment which will keep dirt from sticking later on consequently decreasing the frequency of coil cleaning. First Strike is a great product which turns you coils into self cleaning coils. Be sure to then remove the condensate drain that may be a drain hose from the evaporator or perhaps a weep hole in the window type a/c unit pan. Furthermore, i recommend placing some kind of condensate pan treatment tablets or pads within the evaporator pan to avoid future drain blockage. Now reassemble your air conditioner as well as your all set.